The steps for removing a cylinder head typically include

Release time:

2024-03-23

The steps for removing the cylinder head are as follows: 1. Remove the valve cover bolts and take off the valve cover and oil guide; 2. Unscrew the tensioner nut.

The steps for removing a cylinder head typically include

The cylinder head removal steps are as follows: 1. Remove the valve cover bolts and take off the valve cover and oil guide; 2. Unscrew the tensioner nut and remove the tensioner; 3. Remove the intake and exhaust manifolds; 4. Follow the operating steps of from outside to inside, left and right alternately, and front and back alternately. Loosen the cylinder head bolts in sequence, usually in 2-3 steps, and then remove the cylinder head and gasket. The cylinder head consists of a water jacket, valves and cooling fins, intake and exhaust valve seat holes, valve guide holes, spark plug mounting holes or injector mounting holes. The cylinder head is made of cast iron or aluminum alloy and is the mounting base for the valve mechanism and the sealing cover for the cylinder. Many cars use a structure in which the camshaft support and rocker arm guide seat are integrated with the cylinder head.